Multi-Focus on Practices 2, 3, and 4
Synthesize sampling, probability, and regression: FRQ
3 versions of one AP Statistics free-response question, each with a 10-point rubric and a model answer for every point. Write your response on paper before you open the rubric.
These are StatsLearn originals written in the AP style, not released exam questions. Topics: 1.11 Random Sampling, 2.3 Estimating Probabilities Using Simulation, 2.4 Introduction to Probability, 4.1 Sampling Distributions for Sample Means, 5.3 Linear Regression Models, 5.4 Residuals.
Version 1
An environmental lab has 900 field sensors. It selects 45 sensors by a simple random sample. Each sensor has independent failure probability 0.12 in a storm. Maintenance time y is modeled from sensor age x by y-hat = 9 + 1.8x. Maintenance-time population standard deviation is 12 minutes.
- (a) Describe the sampling method and its scope of inference.
- (b) For a set of 4 sensors, calculate the exact probability of at least one failure and compare it with a simulation that found 204 successes in 500 trials.
- (c) For a sensor aged 6 years with observed maintenance time 22.0 minutes, compute and interpret its prediction and residual.
- (d) Find the standard deviation of x-bar for samples of 36, then explain the limit on a causal reading of the regression.
Show the rubric and model answers
Part (a): 2 points
- Describes a simple random sample. Label the 900 sensors and randomly select 45 distinct labels so every group of 45 has an equal chance.
- States the generalization supported by random sampling. Results from the simple random sample can be generalized to the lab's field sensors, subject to nonresponse or missing measurements.
Part (b): 3 points
- Computes the exact probability of at least one failure. P(at least one) = 1 - 0.88^4 = 0.4003.
- Computes the simulation estimate. The simulated probability is 204/500 = 0.4080.
- Compares simulation with the exact probability. The simulation estimate is close to the exact probability, and a small gap is expected from simulation variation.
Part (c): 3 points
- Computes predicted maintenance time. At age 6, y-hat = 9 + 1.8(6) = 19.8 minutes.
- Computes the residual. Residual = 22.0 - 19.8 = 2.2 minutes.
- Interprets the residual's direction. This sensor took longer to maintain than the model predicted.
Part (d): 2 points
- Computes the sampling distribution spread for x-bar. SD(x-bar) = 12/sqrt(36) = 2.000 minutes.
- Avoids a causal claim from the regression. The regression describes an association between sensor age and maintenance time. Age was not randomly assigned, so it does not establish causation.
Version 2
An environmental lab has 1180 field sensors. It selects 57 sensors by a simple random sample. Each sensor has independent failure probability 0.16 in a storm. Maintenance time y is modeled from sensor age x by y-hat = 13 + 2.2x. Maintenance-time population standard deviation is 16 minutes.
- (a) Describe the sampling method and its scope of inference.
- (b) For a set of 5 sensors, calculate the exact probability of at least one failure and compare it with a simulation that found 389 successes in 660 trials.
- (c) For a sensor aged 10 years with observed maintenance time 37.2 minutes, compute and interpret its prediction and residual.
- (d) Find the standard deviation of x-bar for samples of 52, then explain the limit on a causal reading of the regression.
Show the rubric and model answers
Part (a): 2 points
- Describes a simple random sample. Label the 1180 sensors and randomly select 57 distinct labels so every group of 57 has an equal chance.
- States the generalization supported by random sampling. Results from the simple random sample can be generalized to the lab's field sensors, subject to nonresponse or missing measurements.
Part (b): 3 points
- Computes the exact probability of at least one failure. P(at least one) = 1 - 0.84^5 = 0.5818.
- Computes the simulation estimate. The simulated probability is 389/660 = 0.5894.
- Compares simulation with the exact probability. The simulation estimate is close to the exact probability, and a small gap is expected from simulation variation.
Part (c): 3 points
- Computes predicted maintenance time. At age 10, y-hat = 13 + 2.2(10) = 35.0 minutes.
- Computes the residual. Residual = 37.2 - 35.0 = 2.2 minutes.
- Interprets the residual's direction. This sensor took longer to maintain than the model predicted.
Part (d): 2 points
- Computes the sampling distribution spread for x-bar. SD(x-bar) = 16/sqrt(52) = 2.219 minutes.
- Avoids a causal claim from the regression. The regression describes an association between sensor age and maintenance time. Age was not randomly assigned, so it does not establish causation.
Version 3
An environmental lab has 1460 field sensors. It selects 69 sensors by a simple random sample. Each sensor has independent failure probability 0.20 in a storm. Maintenance time y is modeled from sensor age x by y-hat = 17 + 2.6x. Maintenance-time population standard deviation is 20 minutes.
- (a) Describe the sampling method and its scope of inference.
- (b) For a set of 6 sensors, calculate the exact probability of at least one failure and compare it with a simulation that found 612 successes in 820 trials.
- (c) For a sensor aged 14 years with observed maintenance time 55.6 minutes, compute and interpret its prediction and residual.
- (d) Find the standard deviation of x-bar for samples of 68, then explain the limit on a causal reading of the regression.
Show the rubric and model answers
Part (a): 2 points
- Describes a simple random sample. Label the 1460 sensors and randomly select 69 distinct labels so every group of 69 has an equal chance.
- States the generalization supported by random sampling. Results from the simple random sample can be generalized to the lab's field sensors, subject to nonresponse or missing measurements.
Part (b): 3 points
- Computes the exact probability of at least one failure. P(at least one) = 1 - 0.80^6 = 0.7379.
- Computes the simulation estimate. The simulated probability is 612/820 = 0.7463.
- Compares simulation with the exact probability. The simulation estimate is close to the exact probability, and a small gap is expected from simulation variation.
Part (c): 3 points
- Computes predicted maintenance time. At age 14, y-hat = 17 + 2.6(14) = 53.4 minutes.
- Computes the residual. Residual = 55.6 - 53.4 = 2.2 minutes.
- Interprets the residual's direction. This sensor took longer to maintain than the model predicted.
Part (d): 2 points
- Computes the sampling distribution spread for x-bar. SD(x-bar) = 20/sqrt(68) = 2.425 minutes.
- Avoids a causal claim from the regression. The regression describes an association between sensor age and maintenance time. Age was not randomly assigned, so it does not establish causation.
Keep going
- Score yourself on more versions in the FRQ trainer
- Design a causal school study: AP Stats FRQ practice
- Build and evaluate a probability simulation: FRQ practice
- Compare two quantitative distributions: FRQ practice
- Analyze a regression model: AP Stats FRQ practice
- Carry out a one-proportion z-test: AP Stats FRQ practice
- Construct a one-mean t interval: AP Stats FRQ practice
- Connect an experiment to a two-proportion interval: FRQ
- Calculating the mean: AP Stats multiple choice practice
- Interquartile range (IQR): AP Stats multiple choice practice
- z-scores: AP Stats multiple choice practice
- Scope of inference: AP Stats multiple choice practice
- Sampling bias: AP Stats multiple choice practice
- Conditional proportions in two-way tables multiple choice
- General addition rule: AP Stats multiple choice practice
- Binomial probability: AP Stats multiple choice practice
- Normal distribution: z-score to value multiple choice
- Standard deviation of x-bar: multiple choice practice
- Margin of error for a mean: multiple choice practice
- Residuals: AP Stats multiple choice practice
- Interpreting regression slope: multiple choice practice
- Expected value: AP Stats multiple choice practice